China UHF RFID Reader manufacturer

4 Channels 4 Port RFID Reader , Low Power RFID Reader Industrial With 8dbi Antenna

Product Details:
Place of Origin: CHINA
Brand Name: sunshine
Certification: CE,ROSH
Model Number: F5860
Payment & Shipping Terms:
Minimum Order Quantity: 1
Packaging Details: Carton
Payment Terms: T/T, Western Union
Contact Now

Detail Information

Tag Protocol: EPCglobal UHF Class 1 Gen 2/ISO 18000-6C Working Frequency: 840~960MHz
Communication Interface: USB、RS232、RS485、Ethernet Antenna Interface: Four TNC
GPIO Interface: 3-Road GPIO Can Only Input Can Not Be Input,GPIO Port Default Is Low, The Output High Level Of 5V,GPIO 3 IS USDED TO CONTROL LED State Indicator(green) And Buzzer RSSI: Support
High Temperature Automatic Protection Function: Support
High Light:

four port rfid reader

,

fixed uhf rfid reader

Product Description

UHF RFID Four Port Fixed Reader With Long distance and Ethernet for warehousing application

 

Product Description

  • F5860 is a four port UHF RFID fixed reader, which embeds the M2240 module. Its communication interfaces can be USB, RS485, RS232, and 100M Ethernet, etc.. It has four TNC antennae interfaces. Aluminium alloy of the whole body makes this reader more rugged and durable as well as the excellent heat dissipation capability, antijamming capability and lightning-proof ability.
  • F5860 is suitable for RFID intensive and more challenging environment and required a higher reading/writing performance, such as warehousing, logistics, production line management, etc..

Technical parameters

 

Name Parameters Remark
Reader Chip R2000  
Tag Protocol EPCglobal UHF Class 1 Gen 2/ISO 18000-6C  
Working Frequency 840~960MHz  
Supporting Working Area China, Europe, the United States, South Korea, Japan, Taiwan……  
Operating Voltage 12V DC power supply
Maximum operating current 1A Test of transmit power in 30dBm state
Standby current ≤80mA  
RF port maximum output power 1W(30dBm)  
Working Temperature -25℃~+65℃  
Working Humidity ≤95%(+25℃)  
Storage Temperature -40℃~+80℃  
Receiving -82dBm  
Antenna interface impedance 50Ω  
Serial communication parameters Baud rate adjustable(default 115200bps),parity bit:0 ,data bit:8 ,stop bit:1  
Power output settings 5~30dBm adjustable /Adjustable minimum interval of 1dBm(default 30dBm)  
DRM mode support  
RSSI support  
High temperature automatic protection function support  
Power supply enable support  
GPIO interface

3-Road GPIO can only input can not be input,GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer

 

 
buzzer support  
LED lights

Power indicator: Red

Status indicator: Green

 
Communication Interface USB,RS232,RS485,Ethernet Only one of the communication interfaces on the F5860-H can be used alone. Do not communicate with each other at the same time.
Antenna interface Four TNC The F5860-H working antenna defaults to antenna 1.Antenna parameters can be configured: working antenna, working time, interval time.
dimension 26.5*25.0*4.5CM(including bracket)  
Accessories

12V/3A Power Adapter:1

Serial line: 1 root

 

 

PIN Green Terminal Interface Definition

 

Pin NO. Name Description Remark
1 485-B RS485 B  
2 485-A RS485 A  
3 EN_OUT Equipment enable control interface,When the high level input, the device will be in a state of sleep.The high level voltage is 5V.  
4 GPIO1 GPIO port output, can be programmed to control the level of output.The output high level is 5V, the low level is 0V.The maximum output current is 100mA. (The default output level is low level 0V)  
5 GPIO2 the same as above  
6 GPIO3 the same as above(note:Equipment has occupied this interface for the green LED lights and buzzer control)  
7 NC Reserved interface, no function  
8 NC Reserved interface, no function  
9 WIFI_RESET Device WIFI configuration parameter reset pin,this pin and the GND pin short to 10 seconds to restore the factory settings WIFI.  
10 GND Signal reference.  

 

4 Channels 4 Port RFID Reader , Low Power RFID Reader Industrial With 8dbi Antenna

4 Channels 4 Port RFID Reader , Low Power RFID Reader Industrial With 8dbi Antenna
 

 

How to order


Please chat with us click "send message" to leave massage about the quantity,special modelyou want or your requirement. Then we will reply to you ASAP.

After we confirm all detailed information, we Will Make PI (Performa Invoice) for you to confirm the order if you need.

 

Payment terms

 

1. We accept PayPal, Western Union and Bank transfer.
2. 30% deposit and 70% before shipping.
3. No payment collection. We only can deliver goods after getting full payment.

 

Get in touch with us

Enter Your Message

You Might Be Into These