China UHF RFID Reader manufacturer

Four Ports Radio Frequency Identification Reader , UHF Rfid Reader Rs232

Product Details:
Place of Origin: CHINA
Brand Name: sunshine
Certification: CE,ROSH
Model Number: F5860
Payment & Shipping Terms:
Minimum Order Quantity: 1
Packaging Details: Carton
Payment Terms: T/T, Western Union
Contact Now

Detail Information

Tag Protocol: EPCglobal UHF Class 1 Gen 2/ISO 18000-6C Working Frequency: 840~960MHz
Communication Interface: USB、RS232、RS485、Ethernet Antenna Interface: Four TNC
Reader Chip: R2000 Dimension: 26.5*25.0*4.5CM(including Bracket)
High Light:

multi tag rfid reader


fixed uhf rfid reader

Product Description



Four Ports Radio Frequency Identification Reader , UHF Rfid Reader Rs232
Product Advantage


       1. Support EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C/ ISO18000-6B standard electronic tags;

2. Workingfrequency 860-868MHZ,902-928MHZ(Can be adjusted according to the requirements of different countries or regions);

3. Support RS232,RS485 ,TCP/IP and wireless communication ways;

4. Support 1, 2, 4 external TNC antenna interface;

5. Output power up to 30 dbm(Adjustable), inventory tags peak velocity, > 700 PCS/SEC;

6. Support active ,command and trigger a variety of work modes;

7. Reading buzzer and LED status indicator;Support online upgrade firmware through communication interface;

8. Reader provide 3 road light isolated input, 3 road light output I/O interface, convenient for application integration




Technical parameters

Name Parameters Remark
Reader Chip R2000  
Tag Protocol EPCglobal UHF Class 1 Gen 2/ISO 18000-6C  
Working Frequency 840~960MHz  
Supporting Working Area China, Europe, the United States, South Korea, Japan, Taiwan……  
Operating Voltage 12V DC power supply
Maximum operating current 1A Test of transmit power in 30dBm state
Standby current ≤80mA  
RF port maximum output power 1W(30dBm)  
Working Temperature -25℃~+65℃  
Working Humidity ≤95%(+25℃)  
Storage Temperature -40℃~+80℃  
Receiving -82dBm  
Antenna interface impedance 50Ω  
Serial communication parameters Baud rate adjustable(default 115200bps),parity bit:0 ,data bit:8 ,stop bit:1  
Power output settings 5~30dBm adjustable /Adjustable minimum interval of 1dBm(default 30dBm)  
DRM mode support  
RSSI support  
High temperature automatic protection function support  
Power supply enable support  
GPIO interface

3-Road GPIO can only input can not be input,GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer

buzzer support  
LED lights

Power indicator: Red
Status indicator: Green

Communication Interface USB,RS232,RS485,Ethernet Only one of the communication interfaces on the F5860-H can be used alone. Do not communicate with each other at the same time.
Antenna interface Four TNC The F5860-H working antenna defaults to antenna 1.Antenna parameters can be configured: working antenna, working time, interval time.
dimension 26.5*25.0*4.5CM(including bracket)  

12V/3A Power Adapter:1
Serial line: 1 root


PIN Green Terminal Interface Definition

Pin NO. Name Description Remark
1 485-B RS485 B  
2 485-A RS485 A  
3 EN_OUT Equipment enable control interface,When the high level input, the device will be in a state of sleep.The high level voltage is 5V.  
4 GPIO1 GPIO port output, can be programmed to control the level of output.The output high level is 5V, the low level is 0V.The maximum output current is 100mA. (The default output level is low level 0V)  
5 GPIO2 the same as above  
6 GPIO3 the same as above(note:Equipment has occupied this interface for the green LED lights and buzzer control)  
7 NC Reserved interface, no function  
8 NC Reserved interface, no function  
9 WIFI_RESET Device WIFI configuration parameter reset pin,this pin and the GND pin short to 10 seconds to restore the factory settings WIFI.  
10 GND Signal reference.  

Four Ports Radio Frequency Identification Reader , UHF Rfid Reader Rs232Four Ports Radio Frequency Identification Reader , UHF Rfid Reader Rs232



Q: You are factory or trading company?
A: We are original equipment manufacturer in RFID UHF reader for over 12 years.
Q: How is your QC?
A: We have strict QC process and all the products will be 100% testing before shipping.
Q: What is your payment term?
A: 100% payment should be paid before shipping.
Q: What is your payment way?
A: T/T, Western Union, Alibaba trade assurance order.
Q: What is your warranty?
A: within 1 year.
Q: Can I get technical support from you?
A: Sure. we can customize firmware and development application software for customers.

Get in touch with us

Enter Your Message

You Might Be Into These