China UHF RFID Reader manufacturer

Long Range RFID Reader Module , UHF RFID Module With Automatic Working Mode

Product Details:
Place of Origin: CHINA
Brand Name: SUNSHINE
Certification: CE ,ROSH
Model Number: M2100
Payment & Shipping Terms:
Minimum Order Quantity: 1
Packaging Details: Carton
Payment Terms: T/T, Western Union
Contact Now

Detail Information

Air Interface Protocol: EPCglobal UHF Class 1 Gen 2/ISO 18000-6C Working Frequency: 840~960MHz
Operating Voltage: DC 5V Maximum Operating Current: <350mA
Standby Current: <15mA Sleep Current: <0.5mA
High Light:

uhf reader module

,

rfid read write module

Product Description

Cheap UHF RFID Module with short read distance and ISO 18000-6C
 

Product Description

 

Employed 9200 RF Chips, up to -82dbm receiving sensitivity and the highest performance in this field makes this module more suitable for harsh application environment.

Low power consumption, brilliant performance.
 
Provide the most comprehensive functions SDK and ports, easy to integrate RFID software.
 
Performance parameters
 

Name Parameters Remark
M2100 Version V3.0  
Air interface protocol EPCglobal UHF Class 1 Gen 2/ISO 18000-6C  
working frequency 840~960MHz  
Support area China, Europe, America, Korea, Japan, Taiwan ......  
 
Operating Voltage DC 5V  
Maximum operating current <350mA  
Standby Current <15mA  
Sleep Current <0.5mA  
Maximum RF output power port 28dBm  
Tag maximum read distance >2.5 m (2dBi ceramic antenna + normal white card)  
Operating temperature -25℃~+65℃  
Working humidity ≤95%(+25℃)  
Storage temperature -40℃~+80℃  
Maximum receiver sensitivity -60dBm  
Antenna Impedance 50Ω  
 
Serial communication parameters Baud rate adjustable (default 115200bps), Parity: None Data bits: 8, stop bits: 1  
 
Antenna Interface IPEX  
Module Interface Pick + 20PIN 2.0MM pitch stamp holes 10PIN FPC  
Dimension 30.0×25.0×4.0MM (Including shield)  

  
M2100 FPC PIN Definition
 

Pin Name Description Remark
1 UART TX0 Serial interface to send, TTL level  
2 UART RX0 Serial interface reception, TTL level  
3 P03 GPIO PORT  
4 P10 GPIO PORT  
5 P15 GPIO PORT  
6 P_EN Power enable pin, set low (0V) when the module enters Sleep mode  
7,8 GND GND  
9,10 VCC Power supply pin, the input voltage is 3.7V ~ 5.5V  

 
M2100 Stamp hole defined PIN
 

Pin Name Description Remark
1 VCC Power supply pin, the input voltage is 3.7V ~ 5.5V  
3 P_EN Power enable pin, set low (0V) when the module enters Sleep mode  
3 SWCLK Serial debug clock signal  
4 SWDIO Serial debugging data input and output  
11 UART RX0 Serial interface reception, TTL level  
12 UART TX0 Serial interface to send, TTL level  
13 P03 GPIO Port  
14 P10 GPIO Port  
15 UART TX1 Serial interface to send, TTL level  
16 UART RX1 Serial interface to send, TTL level  
17 P15 GPIO Port  
18 P16 GPIO Port  
19 P17 GPIO Port  
2,6,7,8,9,10,20 GND GND  
21 RF_OUT RF antenna interface  


 

 
 
Long Range RFID Reader Module , UHF RFID Module With Automatic Working Mode
 

Get in touch with us

Enter Your Message

You Might Be Into These