China UHF RFID Reader manufacturer

Vehicle System RFID UHF Module , UHF RFID Reader Module Professional Design

Product Details:
Place of Origin: CHINA
Brand Name: SUNSHINE
Certification: CE ,ROSH
Model Number: M2100
Payment & Shipping Terms:
Minimum Order Quantity: 1
Packaging Details: Carton
Payment Terms: T/T, Western Union
Contact Now

Detail Information

Air Interface Protocol: EPCglobal UHF Class 1 Gen 2/ISO 18000-6C Working Frequency: 840~960MHz
Operating Voltage: DC 5V Maximum Operating Current: <350mA
Tag Maximum Read Distance: >2.5 M (2dBi Ceramic Antenna + Normal White Card) Maximum Receiver Sensitivity: -60dBm
High Light:

uhf reader module

,

rfid read write module

Product Description

UHF RFID Module Embedded RFID Readers for Vehicle System and Low power consumption

 

Product Description

 

Low power consumption, brilliant performance.
 

Employed 9200 RF Chips, up to -82dbm receiving sensitivity and the highest performance in this field makes this module more suitable for harsh application environment.
 

Application scenarios

  • Exhibition: Access control, data acquisition solution, RFID wrist strap technology solutions in the exhibition center,
  • Manufacture: garment manufacturer’s operational sequence solution
  • Interlock: running multiple shop’s management solution
  • Express: express and logistics industry’s mobile application
  • Transportation: jeeves,smart parking’s charging solution
  • Medicine: the application of the electronic supervision of drug
  • Highroad: road traffic inspection management solution
  • Asset: Mobile assets inventory management system, routing inspection management system.
  • Traceability: products/goods traceability management system.
  • Anti-fake: cigarettes and wine, valuables’ anti-fake application
  • Sales: the retail inventory, promotion, cargo inventory management
  • Agriculture: smart agriculture and forestry management solution, Temperature and humidity monitoring system.
  • Operator: the base station inspection, network optimization

 

Performance parameters

Name Parameters Remark
M2100 Version V3.0  
Air interface protocol EPCglobal UHF Class 1 Gen 2/ISO 18000-6C  
working frequency 840~960MHz  
Support area China, Europe, America, Korea, Japan, Taiwan ......  
 
Operating Voltage DC 5V  
Maximum operating current <350mA  
Standby Current <15mA  
Sleep Current <0.5mA  
Maximum RF output power port 28dBm  
Tag maximum read distance >2.5 m (2dBi ceramic antenna + normal white card)  
Operating temperature -25℃~+65℃  
Working humidity ≤95%(+25℃)  
Storage temperature -40℃~+80℃  
Maximum receiver sensitivity -60dBm  
Antenna Impedance 50Ω  
 
Serial communication parameters Baud rate adjustable (default 115200bps), Parity: None Data bits: 8, stop bits: 1  
 
Antenna Interface IPEX  
Module Interface Pick + 20PIN 2.0MM pitch stamp holes 10PIN FPC  
Dimension 30.0×25.0×4.0MM (Including shield)  

 

M2100 FPC PIN Definition

 

Pin Name Description Remark
1 UART TX0 Serial interface to send, TTL level  
2 UART RX0 Serial interface reception, TTL level  
3 P03 GPIO PORT  
4 P10 GPIO PORT  
5 P15 GPIO PORT  
6 P_EN Power enable pin, set low (0V) when the module enters Sleep mode  
7,8 GND GND  
9,10 VCC Power supply pin, the input voltage is 3.7V ~ 5.5V  

 

M2100 Stamp hole defined PIN

 

Pin Name Description Remark
1 VCC Power supply pin, the input voltage is 3.7V ~ 5.5V  
3 P_EN Power enable pin, set low (0V) when the module enters Sleep mode  
3 SWCLK Serial debug clock signal  
4 SWDIO Serial debugging data input and output  
11 UART RX0 Serial interface reception, TTL level  
12 UART TX0 Serial interface to send, TTL level  
13 P03 GPIO Port  
14 P10 GPIO Port  
15 UART TX1 Serial interface to send, TTL level  
16 UART RX1 Serial interface to send, TTL level  
17 P15 GPIO Port  
18 P16 GPIO Port  
19 P17 GPIO Port  
2,6,7,8,9,10,20 GND GND  
21 RF_OUT RF antenna interface  

 

Vehicle System RFID UHF Module , UHF RFID Reader Module Professional Design

 

Vehicle System RFID UHF Module , UHF RFID Reader Module Professional Design

 

FAQ
 

Q1. Can I have a sample order for reader ?

A: NO , you need buy sample

Q2. What about the lead time?

A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than

Q3. Do you have any MOQ limit for reader order?

A: Low MOQ, 1pc for sample checking is available

Get in touch with us

Enter Your Message

You Might Be Into These